MYDOCUMENT: Konfigurasi Routing Static

Konfigurasi Routing Static



Buatlah konsep jaringan sesuai keinginan anda











Settinglah IP pada setiap PC :

PC0 :                                                             PC3 :
Ip Address       192.168.10.2                           Ip Address       192.168.40.2
Netmask         255.255.255.0                          Netmask         255.255.255.0
Gateway          192.168.10.1                           Gateway          192.168.40.1

PC1 :                                                             PC4 :
Ip Adress         192.168.20.2                           Ip Address        192.168.50.2
Netmask         255.255.255.0                           Netmask         255.255.255.0
Gateway          192.168.20.1                            Gateway          192.168.50.1

PC2 :
Ip Adress         192.168.30.2
Netmask         255.255.255.0
Gateway          192.168.30.1




Configurasi pada Router 0 menggunakan CLI :

Router 1 :

Konfigurasi Fastethernet 0/0
Router>en
Router#config t
Router(config)#int fa0/0

Selanjutnya masukan Gateway pada PC 0 yang tersambung pada Fastethernet 0/0 (fa0/0)
Router(config-if)#ip add 192.168.10.1 255.255.255.0
Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit

Konfigurasi Fastethernet 1/0
Router(config)#int fa0/1

Selanjutnya masukan Gateway pada PC 1 yang tersambung pada Fastethernet 0/1 (fa0/1)
Router(config-if)#ip add 192.168.20.1 255.255.255.0
Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up


Selanjutnya Konfigurasi kabel Serial pada setiap Router untuk menghubungkan sesama Router
Router>en
Router#config t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int serial2/0
Router(config-if)#ip add 192.168.1.1 255.255.255.0
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Router(config-if)#ex

Router 2 :

Konfigurasi Fastethernet 0/0
Router>en
Router#config t
Router(config)#int fa0/0

Selanjutnya masukan Gateway pada PC 2 yang tersambung pada Fastethernet 0/0 (fa0/0)
Router(config-if)#ip add 192.168.30.1 255.255.255.0
Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit



Selanjutnya Konfigurasi kabel Serial pada setiap Router untuk menghubungkan sesama Router
Router#config t
Router(config)#int serial2/0
Router(config-if)#ip add 192.168.1.2 255.255.255.0
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to up
Router(config-if)#ex

Selanjutnya Konfigurasi kabel Serial pada setiap Router untuk menghubungkan sesama Router
Router(config)#int serial3/0
Router(config-if)#ip add 192.168.2.1 255.255.255.0
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to up
Router(config-if)#ex

Router 3 :

Konfigurasi Fastethernet 0/0
Router>en
Router#config t
Router(config)#int fa0/0

Selanjutnya masukan Gateway pada PC 3 yang tersambung pada Fastethernet 0/0 (fa0/0)
Router(config-if)#ip add 192.168.40.1 255.255.255.0
Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit

Konfigurasi Fastethernet 1/0
Router(config)#int fa0/1

Selanjutnya masukan Gateway pada PC 4 yang tersambung pada Fastethernet 0/0 (fa0/0)
Router(config-if)#ip add 192.168.50.1 255.255.255.0
Router(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit

Selanjutnya Konfigurasi kabel Serial pada setiap Router untuk menghubungkan sesama Router
Router#config t
Router(config)#int serial3/0
Router(config-if)#ip add 192.168.2.2 255.255.255.0
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial3/0, changed state to up
Router(config-if)#ex

Masukan IP ROUTE pada setiap router :

Masukan GATEWAY PADA PC  = NETMASK = IP TUJUAN

Router 1 :
Router#config t
Router(config)#ip route 192.168.10.0 255.255.255.0 192.168.1.2
Router(config)#ip route 192.168.20.0 255.255.255.0 192.168.1.2
Router(config)#ip route 192.168.30.0 255.255.255.0 192.168.1.2
Router(config)#ip route 192.168.40.0 255.255.255.0 192.168.1.2
Router(config)#ip route 192.168.50.0 255.255.255.0 192.168.1.2
Router(config)#end
Router#

%SYS-5-CONFIG_I: Configured from console by console

Router#config t
Router(config)#ip route 192.168.10.0 255.255.255.0 192.168.2.2
Router(config)#ip route 192.168.20.0 255.255.255.0 192.168.2.2
Router(config)#ip route 192.168.30.0 255.255.255.0 192.168.2.2
Router(config)#ip route 192.168.40.0 255.255.255.0 192.168.2.2
Router(config)#ip route 192.168.50.0 255.255.255.0 192.168.2.2
Router(config)#end
Router#

%SYS-5-CONFIG_I: Configured from console by console

Router 2 :
Router#config t
Router(config)#ip route 192.168.10.0 255.255.255.0 192.168.1.1
Router(config)#ip route 192.168.0.0 255.255.255.0 192.168.1.1
Router(config)#ip route 192.168.20.0 255.255.255.0 192.168.1.1
Router(config)#ip route 192.168.30.0 255.255.255.0 192.168.1.1
Router(config)#ip route 192.168.40.0 255.255.255.0 192.168.1.1
Router(config)#ip route 192.168.50.0 255.255.255.0 192.168.1.1
Router(config)#end
Router#

%SYS-5-CONFIG_I: Configured from console by console

Router#config t
Router(config)#ip route 192.168.10.0 255.255.255.0 192.168.2.2
Router(config)#ip route 192.168.20.0 255.255.255.0 192.168.2.2
Router(config)#ip route 192.168.30.0 255.255.255.0 192.168.2.2
Router(config)#ip route 192.168.40.0 255.255.255.0 192.168.2.2
Router(config)#ip route 192.168.50.0 255.255.255.0 192.168.2.2
Router(config)#end
Router#

%SYS-5-CONFIG_I: Configured from console by console

Router 3 :
Router#configure terminal
Router(config)#ip route 192.168.10.0 255.255.255.0 192.168.1.1
Router(config)#ip route 192.168.20.0 255.255.255.0 192.168.1.1
Router(config)#ip route 192.168.30.0 255.255.255.0 192.168.1.1
Router(config)#ip route 192.168.40.0 255.255.255.0 192.168.1.1
Router(config)#ip route 192.168.50.0 255.255.255.0 192.168.1.1
Router(config)#end
Router#

%SYS-5-CONFIG_I: Configured from console by console

Router#configure terminal
Router(config)#ip route 192.168.10.0 255.255.255.0 192.168.2.1
Router(config)#ip route 192.168.20.0 255.255.255.0 192.168.2.1
Router(config)#ip route 192.168.30.0 255.255.255.0 192.168.2.1
Router(config)#ip route 192.168.40.0 255.255.255.0 192.168.2.1
Router(config)#ip route 192.168.50.0 255.255.255.0 192.168.2.1
Router(config)#end
Router#

%SYS-5-CONFIG_I: Configured from console by console

Lakukan Test dengan cara mengirim pesan pada setiap PC









Diposting oleh di
< >

Tidak ada komentar:

Posting Komentar

Langganan: Posting Komentar (Atom)
Copyright © MYDOCUMENT Yusran Syuja| Published by ---